Mac Notification Settings - D-Link DGS-3700-12 User Manual

MAC Notification Settings

MAC Notification is used to monitor MAC addresses learned and entered into the forwarding database. This window
allows you to globally set MAC notification on the Switch. Users can set MAC notification for individual ports on the
Switch.
To view this window, click L2 Features > FDB > MAC Notification Settings, as shown below:
The fields that can be configured are described below:
Parameter
State
Interval
History Size
From Port
To Port
State
Click Apply to implement changes made.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 39 MAC Notification Settings window
Description
Enable or disable MAC notification globally on the Switch
The time in seconds between notifications. Value range to use is 1 to 2147483647.
The maximum number of entries listed in the history log used for notification. Up to 500
entries can be specified.
Select a beginning port to enable for MAC notification using the pull-down menu.
Select an ending port to enable for MAC notification using the pull-down menu.
Enable MAC Notification for the ports selected using the pull-down menu.
99