D-Link DES-1228/ME Reference Manual page 23

config serial_port
Purpose
Syntax
Description
Parameters
Restriction
s
Example usage:
To configure the baud rate:
DES-1228/ME:5#config serial_port baud_rate 115200
Command: config serial_port baud_rate 115200
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to configure the serial port.
config serial_port { baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never |
2_minutes | 5_minutes | 10_minutes | 15_minutes] } (1)
This command is used to configure the serial port's baud rate and auto logout
settings.
baud_rate [9600 | 19200 | 38400 | 115200] − The serial bit rate that will be used to
communicate with the management host. There are four options: 9600, 19200,
38400, and 115200.
never − No time limit on the length of time the console can be open with no user
input.
2_minutes − The console will log out the current user if there is no user input for 2
minutes.
5_minutes − The console will log out the current user if there is no user input for 5
minutes.
10_minutes − The console will log out the current user if there is no user input for 10
minutes.
15_minutes − The console will log out the current user if there is no user input for 15
minutes.
Only Administrator level and Operator level users can issue this command.
19