D-Link DES-1228/ME Reference Manual page 329

Example usage
To display the LLDP system level configuration status:
DES-1228/ME:5#show lldp
Command: show lldp
LLDP System Information
Chassis Id Subtype
Chassis Id
System Name
System Description
System Capabilities
LLDP Configurations
LLDP Status
LLDP Forward Status
Message Tx Interval
Message Tx Hold Multiplier: 4
ReInit Delay
Tx Delay
Notification Interval
DES-1228/ME:5#
show lldp mgt_addr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display the management address information:
DES-1228/ME:5# show lldp mgt_addr ipv4 192.168.254.10
Command: show lldp mgt_addr ipv4 192.168.254.10
Total Address:1
DES-1228/ME:5#
show lldp ports
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
: MAC Address
: 00-12-28-8E-77-00
:
: Metro Ethernet Switch
: Repeater, Bridge
: Disable
: Disable
: 30
: 2
: 2
: 5
Used to display the LLDP management address information.
show lldp mgt_addr {ipv4 <ipaddr>}
This command is used to display LLDP management address
information.
ipv4 - IP address of IPV4.
None.
Used to display the LLDP per port configuration for advertisement
options.
show lldp ports {<portlist> }
This command is used to display the LLDP per port configuration for
advertisement options.
<portlist> - Specify a range of ports to be displayed.
When port list is not specified, information for all ports will be displayed.
None.
325