D-Link DES-1228/ME Reference Manual page 354

enable loopdetect
Purpose Used to globally enable the loop-detect function on the Switch.
Syntax enable loopdetect
Description This command is used to allow the loop detection function to be globally enabled on the Switch.
The default value is disabled.
Parameters None.
Restrictions
Only Administrator level, Operator level or Power User level users can issue this command.
Example usage :
To enable loopback detection on the Switch:
DES-1228/ME:5# enable loopdetect
Command: enable loopdetect
Success.
DES-1228/ME:5#
disable loopdetect
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To disable the loopback detection function on the Switch:
DES-1228/ME:5# disable loopdetect
Command: disable loopdetect
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to globally disable the loopback detection on the Switch.
disable loopdetect
This command is used to globally disable the loopback detection on the Switch. The
default value is disabled.
None.
Only Administrator level, Operator level or Power User level users can issue this
command.
350