D-Link DES-1228/ME Reference Manual page 104

Layer 2 managed ethernet switch
Hide thumbs Also See for DES-1228/ME:
Table of Contents

Advertisement

Example usage:
To configure a syslog host:
DES-1228/ME:5#config syslog host 1 severity all facility local0
Command: config syslog host all severity all facility local0
Success.
DES-1228/ME:5#
To configure a syslog host for all hosts:
DES-1228/ME:5#config syslog host all severity all facility local0
Command: config syslog host all severity all facility local0
Success.
DES-1228/ME:5#
delete syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured syslog host:
DES-1228/ME:5#delete syslog host 4
Command: delete syslog host 4
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to remove a syslog host that has been previously configured,
from the Switch.
delete syslog host [<index 1-4> | all]
This command is used to remove a syslog host that has been
previously configured from the Switch.
<index 1-4> − Specifies that the command will be applied to an index
of hosts. There are four available indexes, numbered 1 through 4.
all − Specifies that the command will be applied to all hosts.
Only Administrator level, Operator level or Power User level users can
issue this command.
100

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents