D-Link DES-1228/ME Reference Manual page 175

DES-1228/ME:5#enable ipif_ipv6_link_local_auto System
Command: enable ipif_ipv6_link_local_auto System
Success.
DES-1228/ME:5#
disable ipif_ipv6_link_local_auto
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the automatic configuration of link local address for an interface:
DES-1228/ME:5#disable ipif_ipv6_link_local_auto System
Command: disable ipif_ipv6_link_local_auto System
Success.
DES-1228/ME:5#
show ipif_ipv6_link_local_auto
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display interface information:
DES-1228/ME:5#show pif_ipv6_link_local_auto
Command: show pif_ipv6_link_local_auto
IPIF: System
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to disable the auto configuration of a link local address when
no IPv6 address is configured.
disable ipif_ipv6_link_local_auto [System]
This command is used to disable the auto configuration of a link
local address when no IPv6 address is explicitly configured.
None.
Only Administrator level, Operator level or Power User level users
can issue this command.
Used to display the link local address automatic configuration state.
show ipif_ipv6_link_local_auto
This command is used to display the link local address automatic
configuration state.
None.
None.
Automatic Link Local Address: Disabled
171