D-Link DES-1228/ME Reference Manual page 330

Layer 2 managed ethernet switch
Hide thumbs Also See for DES-1228/ME:
Table of Contents

Advertisement

Example usage
To display the LLDP per port TLV option configuration:
DES-1228/ME:5# show lldp ports 1
Command: show lldp ports 1
Port ID
---------------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option
Port Description
System Name
System Description
System Capabilities
Enabled Management Address
(NONE.)
Port VLAN ID
Enabled Port_and_protocol_VLAN_ID
(NONE)
Enabled VLAN Name
(NONE.)
Enabled protocol_identity
(NONE.)
MAC/PHY Configuration/Status
Power Via MDI
Link Aggregation
Maximum Frame Size
DES-1228/ME:5#
show lldp local_ports
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
: 1
: TX_and_RX
: Disable
:
Used to display the per-port information currently available for populating
outbound LLDP advertisements.
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
This command is used to display the per-port information currently
available for populating outbound LLDP advertisements.
<portlist> - Specify a range of ports to be configured.
When a port list is not specified, information for all ports will be displayed.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default
display mode.
detailed - Display the information in detailed mode.
None.
Disable
326
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents