Mac Notification Settings; Mac Notification Global Settings - D-Link DGS-3200 Series User Manual

To: Day Of Week
To: Month
To: Time In HH:MM
DST Annual Settings - Using annual mode will enable DST seasonal time adjustment. Annual mode requires that
the DST beginning and ending date be specified concisely. For example, specify to begin DST on April 3 and end
DST on October 14.
From: Month
From: Day
From: Time In HH:MM
To: Month
To: Day
To: Time In HH:MM
Click Apply to implement changes made to this window.

MAC Notification Settings

MAC Notification is used to monitor MAC addresses learned and entered into the forwarding database.
The MAC Notification Settings folder contains two windows: MAC Notification Settings and MAC Notification Port
Settings.

MAC Notification Global Settings

To globally set MAC notification on the Switch, open the Configuration folder, click MAC Notification Settings, and click the
MAC Notification Global Settings link, revealing the following window.
The following parameters may be viewed and modified:
Parameter
State
Interval (1-2147483647 sec)
History Size (1-500)
Click Apply to implement your changes.
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Enter the day of the week that DST will end.
Enter the month that DST will end.
Enter the time DST will end.
Enter the month DST will start on, each year.
Enter the day of the month DST will start on, each year.
Enter the time of day DST will start on, each year.
Enter the month DST will end on, each year.
Enter the day of the monthDST will end on, each year.
Enter the time of day that DST will end on, each year.
Figure 6- 33. MAC Notification Global Settings window
Description
Enable or disable MAC notification globally on the Switch
The time in seconds between notifications.
The maximum number of entries listed in the history log used for notification. Up to
500 entries can be specified.
53