Command Syntax - D-Link DES-1228/ME Reference Manual

The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual.
<angle brackets>
Purpose
Syntax
Description
Example Command
[square brackets]
Purpose
Syntax
Description
Example Command
| vertical bar
Purpose
Syntax
Description
Example Command
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Note: All commands are case-sensitive. Be sure to disable Caps Lock or any
other unwanted function that changes text case.
Encloses a variable or value that must be specified.
config ipif <System> [{ipaddress <network_address> | vlan <vlan_name
32> | state [enable | disable}] | bootp | dhcp]
In the above syntax example, users must supply an IP interface name in the
<System> space, a VLAN name in the <vlan_name 32> space, and the
network address in the <network_address> space. Do not type the angle
brackets.
config ipif System ipaddress 10.24.22.5/8 vlan Design state enable
Encloses a required value or set of required arguments. One value or
argument can be specified.
create account [admin | operator| Power User|user] <username 15>
In the above syntax example, users must specify either an admin or a user
level account to be created. Do not type the square brackets.
create account admin ctsnow
Separates two or more mutually exclusive items in a list, one of which must
be entered.
create account [admin | operator| Power User|user] <username 15>
In the above syntax example, users must specify either admin, or user. Do
not type the vertical bar.
create account admin ctsnow
7
C S
OMMAND
3
YNTAX