D-Link DES-1228/ME Reference Manual page 382

Example usage:
To add an entry from the DHCP server/client filter list in the switch's database:
DES-1228/ME:5#config filter dhcp_server add permit_server_ip 10.1.1.1 client_mac 00-00-00-00-00-
01 port all
Command: config filter dhcp_server add permit_server_ip 10.1.1.1 client_mac 00-00-00-00-00-01
port all
Success
DES-1228/ME:5#
To configure the DHCP filter state:
DES-1228/ME:5#config
enable
Command: config filter dhcp_server ports 1-10 state enable
Success
DES-1228/ME:5#
show filter dhcp_server
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the DHCP server filter list created on the switch:
DES-1228/ME:5#show filter dhcp_server
Command: show filter dhcp_server
Enabled ports : 1-10
Trap State : Disabled
Log State : Disabled
Illegal_Server_Log_Suppress_Duration : 5 Minutes
Permit DHCP Server/Client Table:
Server IP Address Client MAC address Ports
----------------- ------------------ ----------------
10.254.254.251
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
filter
Used to display current DHCP server/client filter list created on the switch.
show filter dhcp_server
This command is used to display DHCP server/client filter list created on the
switch.
None.
None.
00-1A-92-24-80-F1
dhcp_server ports
1-10
378
1-10 state