D-Link DES-1228/ME Reference Manual page 52

Command
create snmp user
delete snmp user
show snmp user
create snmp view
delete snmp view
show snmp view
create snmp community
delete snmp community
show snmp community
config snmp engineID
show snmp engineID
create snmp group
delete snmp group
show snmp groups
create snmp
delete snmp
show snmp host
create trusted_host
delete trusted_host
show trusted_host
enable snmp traps
enable snmp authenticate_traps
enable snmp linkchange_traps
disable snmp traps
disable snmp authenticate_traps
disable snmp linkchange_traps
config snmp linkchange_traps
ports
show snmp traps
config snmp system_contact
config snmp system_location
config snmp system_name
enable rmon
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
<SNMP_name 32> <groupname 32> {encrypted [by_password auth [md5
<auth_password 8-16 > | sha <auth_password 8-20>] priv [none | des
<priv_password 8-16>] | by_key auth [md5 <auth_key 32-32> | sha <auth_key
40-40>] priv [none | des <priv_key 32-32>]]}
<SNMP_name 32>
<view_name 32> <oid> view_type [included | excluded]
<view_name 32> [all | oid]
{<view_name 32>}
<community_string 32> view <view_name 32> [read_only | read_write]
<community_string 32>
{<community_string 32>}
<snmp_engineID 10-64>
<groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
{read_view <view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>} (1)
<groupname 32>
[host <ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
<auth_string 32>
[host <ipaddr>]
{<ipaddr>}
[<ipaddr> | network<network_address>]
[ipaddr<ipaddr> | network<network_address> | all]
[all | <portlist>] [enable | disable]
{linkchange_traps { ports <portlist>} }
{<sw_contact>}
{<sw_location>}
{<sw_name>}
48