D-Link DES-1228/ME Reference Manual page 165

delete link_aggregation group_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete link aggregation group:
DES-1228/ME:5#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DES-1228/ME:5#
config link_aggregation
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To define a load-sharing group of ports, group-id 1,master port 1 with group members ports 1 through 4:
DES-1228/ME:5#config link_aggregation group_id 1 master_port 1 ports 1-4
Command: config link_aggregation group_id 1 master_port 1 ports 1-4
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to delete a previously configured link aggregation group.
delete link_aggregation group_id <value>
This command is used to delete a previously configured link
aggregation group.
<value> − Specifies the group ID. The Switch allows up to 6 link
aggregation groups to be configured. The group number identifies
each of the groups.
Only Administrator level, Operator level or Power User level users can
issue this command.
Used to configure a previously created link aggregation group.
config link_aggregation group_id <value> {master_port <port> | ports
<portlist> | state [enable | disable]} (1)
This command is used to configure a link aggregation group that was
created with the create link_aggregation command above.
group _id <value> − Specifies the group ID. The Switch allows up to 6
link aggregation groups to be configured. The group number identifies
each of the groups.
master_port <port> − Master port ID. Specifies which port (by port
number) of the link aggregation group will be the master port. All of the
ports in a link aggregation group will share the port configuration with
the master port.
ports <portlist> − Specifies a port or range of ports that will belong to
the link aggregation group.
state [enable | disable] − Allows users to enable or disable the
specified link aggregation group.
Only Administrator level, Operator level or Power User level users can
issue this command. Link aggregation groups may not overlap.
161