D-Link DES-1228/ME Reference Manual page 314

show igmp_snooping multicast_vlan_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the multicast groups configured for a multicast VLAN:
DES-1228/ME:5#show igmp_snooping multicast_vlan_group v1
Command: show igmp_snooping multicast_vlan_group v1
VLAN Name
-----------
v1
DES-1228/ME:5#
delete igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an IGMP snoop multicast VLAN:
DES-1228/ME:5# delete igmp_snooping multicat_vlan v1
Command: delete igmp_snooping multicat_vlan v1
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the multicast groups configured for the specified
multicast VLAN.
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
This command is used to display the multicast groups configured for
the specified multicast VLAN.
<vlan_name 32> - The name of the multicast VLAN to be configured,
each multicast VLAN is given a name that can be up to 32
characters. If no parameters are specified, the system will display all
multicast VLAN groups on the Switch.
None.
VLAN ID From
--------- ----------
100 224.19.62.34
Used to delete a multicast VLAN.
delete igmp_snooping multicat_vlan <vlan_name 32>
This command is used to delete a multicast VLAN.
<vlan_name 32> - The name of the multicast VLAN to be deleted.
Only Administrator level, Operator level or Power User level users
can issue this command.
To
---------
224.19.162.200
310