D-Link DES-1228/ME Reference Manual page 283

Example usage:
To enable the SSH authentication mode by password:
DES-1228/ME:5#config ssh authmode password enable
Command: config ssh authmode password enable
Success.
DES-1228/ME:5#
show ssh authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current authentication mode set on the Switch:
DES-1228/ME:5#show ssh authmode
Command: show ssh authmode
The SSH Authmode:
-------------------------------------------------
Password
Publickey
Hostbased
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the SSH authentication mode setting.
show ssh authmode
This command is used to display the current SSH authentication set
on the Switch.
None.
None.
: Enabled
: Enabled
: Enabled
279