Network Management (Snmp) Commands - D-Link DES-1228/ME Reference Manual

The Switch supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. Users can specify which version of
the SNMP users want to use to monitor and control the Switch. The three versions of SNMP vary in the level of security provided
between the management station and the network device. The following table lists the security features of the three SNMP
versions:
SNMP Authentication Method
Version
v1 Community String
v2c Community String
v3 Username
v3 MD5 or SHA
v3 MD5 DES or SHA DES
The Network Management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table:
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
N M
ETWORK
Description
Community String is used for authentication − NoAuthNoPriv
Community String is used for authentication − NoAuthNoPriv
Username is used for authentication − NoAuthNoPriv
Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms −
AuthNoPriv
Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms − AuthPriv.
DES 56-bit encryption is added based on the CBC-DES (DES-56) standard
ANAGEMENT
47
(SNMP) C
OMMANDS
8