D-Link DES-1228/ME Reference Manual page 91

config terminal line
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the terminal line:
DES-1228/ME:5# config terminal_line 30
Command: config terminal_line 30
Success.
DES-1228/ME:5#
show terminal line
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the terminal line:
DES-1228/ME:5# show terminal_line
Command: show terminal_line
Current terminal line number : 30
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to configure the number of rows which can be displayed at a
screen.
config terminal_line [default | <value 20-80>]
This command is used to configure the number of rows which can be
displayed on a screen. The default value is 24.
None.
Only Administrator level, Operator level or Power User level users
can issue this command.
Used to display the number of rows which can be displayed at a
screen.
show terminal_line
This command is used to display the number of rows which can be
displayed on a screen.
None.
None.
87