D-Link DES-1228/ME Reference Manual page 115

Example usage:
To configure STP with path cost auto, hellotime 2 seconds, migration enable, and state enable for ports 1 to 2:
DES-1228/ME:5#config stp ports 1-2 externalCost auto hellotime 2 migrate yes state enable
Command: config stp ports 1-2 externalCost auto hellotime 2 migrate yes state enable
DES-1228/ME:5#
create stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a spanning tree instance 2:
DES-1228/ME:5#create stp instance_id 2
Command: create stp instance_id 2
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to create a STP instance ID for MSTP.
create stp instance_id <value 1-8>
This command allows the user to create a STP instance ID for the Multiple Spanning Tree
Protocol. There are five STP instances on the Switch (one internal CIST, unchangeable)
and the user may create up to four instance IDs for the Switch.
<value 1-8> − Enter a value between 1 and 8 to identify the Spanning Tree instance on
the Switch.
Only Administrator level, Operator level or Power User level users can issue this
command.
111