D-Link DES-1228/ME Reference Manual page 186

show igmp_snooping host
Restrictions
Example usage:
To display IGMP snooping fast leave hosts:
DES-1228/ME:5# show igmp_snooping host
Command: show igmp_snooping host
VLAN ID
--------
1
1
1
1
1
1
1
1
1
1
1
Total Entries : 11
DES-1228/ME:5#
config igmp access_authentication ports
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
None.
Group
-----------------
225.0.1.0
225.0.1.0
225.0.1.0
225.0.1.2
225.0.2.3
225.0.3.4
225.0.4.5
225.0.5.6
225.0.6.7
225.0.7.8
239.255.255.250
Used to configure the IGMP Access Control port status.
config igmp access_authentication ports [<portlist> | all] state [enable
| disable]
This command is used to enable or disable IGMP Access Control
function for specified port. When the access_authentication is
enabled, and the switch received an IGMP JOIN, the switch will send
the access request to the RADIUS server to do the authentication.
<portlist> − Specifies a range of ports to be configured.
state − Enable or disable the RADIUS authentication function on the
specified ports.
Only Administrator level, Operator level or Power User level users
can issue this command.
Port No IGMP Host
--------- ------------
2 198.19.1.2
2 198.19.1.3
3 198.19.1.4
2 198.19.1.3
3 198.19.1.4
3 198.19.1.5
5 198.19.1.6
5 198.19.1.7
4 198.19.1.8
4 198.19.1.9
7 10.90.90.90
182