Ipv6 Neighbour Discovery Commands - D-Link DES-1228/ME Reference Manual

The IPv6 Neighbor Discovery commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
create ipv6
neighbor_cache ipif
delete ipv6
neighbor_cache ipif
show ipv6
neighbor_cache ipif
show ipv6 nd
config ipv6 nd ns ipif
create ipv6 neighbor_cache ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a static neighbor cache entry:
DES-1228/ME:5#create
00:01:02:03:04:05
Command: create ipv6 neighbor_cache ipif System 3ffc::1 00:01:02:03:04:05
Success.
DES-1228/ME:5#
delete ipv6 neighbor_cache ipif
Purpose
Syntax
Description
Parameters
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
IP 6 N
V
<ipif_name 12> <ipv6addr> <macaddr>
[<ipif_name 12> | all] [<ipv6addr> | static |dynamic |all]
[<ipif_name 12> | all] [ipv6address <ipv6addr> | static
|dynamic |all]
{ipif <ipif_name 12>}
<ipif name 12> retrans_time <uint 0–4294967295>
Used to add a static neighbor to an IPv6 interface.
create ipv6 neighbor_cache ipif <ipif_name 12> <ipv6addr>
<macaddr>
This command is used to add a static neighbor to an IPv6 interface.
<ipif_name> − The interface's name.
<ipv6addr> − The address of the neighbor.
<macaddr> − The MAC address of the neighbor.
Only Administrator level, Operator level or Power User level users can
issue this command.
ipv6
Used to delete an IPv6 neighbor from the interface neighbor address
cache.
delete ipv6 neighbor_cache ipif [<ipif_name 12> | all] [<ipv6addr> | static
| dynamic | all]
This command is used to delete a neighbor cache entry or static
neighbor cache entries from the address cache or all address cache
entries on this ipif. Both static and dynamic entry can be deleted.
<ipif_name> − The IPv6 interface's name.
<ipv6addr> − The address of the neighbor.
D
EIGHBOUR
neighbor_cache ipif
380
C
ISCOVERY OMMANDS
System 3ffc::1
50