D-Link DES-1228/ME Reference Manual page 145

config 802.1p default_priority
Purpose Used to configure the 802.1p default priority settings on the Switch. If an untagged packet is
received by the Switch, the priority configured with this command will be written to the
packet's priority field.
Syntax
config 802.1p default_priority [<portlist> | all] <priority 0-7>
Description This command is used to specify default priority handling of untagged packets received by
the Switch. The priority value entered with this command will be used to determine to which
of the four hardware priority queues the packet is forwarded.
<portlist> − Specifies a port or range of ports to be configured.
Parameters
all − Specifies that the command applies to all ports on the Switch.
<priority 0-7> − The priority value to assign to untagged packets received by the Switch or a
range of ports on the Switch.
Restrictions
Only Administrator level, Operator level or Power User level users can issue this command.
Example usage:
To configure 802.1p default priority on the Switch:
DES-1228/ME:5#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
141