D-Link DES-1228/ME Reference Manual page 206

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
DES-1228/ME:5#config radius delete 1
Command: config radius delete 1
Success.
DES-1228/ME:5#
config radius
Purpose Used to configure the Switch's RADIUS settings.
Syntax config radius <server_index 1-3> {ipaddress <server_ip> | key
<passwd 32> [auth_port <udp_port_number 1-65535> acct_port
<udp_port_number 1-65535>] } (1)
Description
This command is used to configure the Switch's RADIUS settings.
<server_index 1-3> − Assigns a number to the current set of
Parameters
RADIUS server settings. Up to three groups of RADIUS server
settings can be entered on the Switch.
ipaddress <server_ip> − The IP address of the RADIUS server.
key − Specifies that a password and encryption key will be used
between the Switch and the RADIUS server.
<passwd 32> − The shared-secret key used by the RADIUS server
and the Switch. Up to 32 characters can be used.
auth_port <udp_port_number 1-65535> − The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number 1-65535> − The UDP port number for
accounting requests. The default is 1813.
Restrictions Only Administrator level, Operator level or Power User level users
can issue this command.
202