D-Link DES-1228/ME Reference Manual page 267

show authen_enable
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DES-1228/ME:5#show authen_enable all
Command: show authen_enable all
Method List Name
----------------
Permit
default
Total Entries : 2
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the method list of authentication methods for promoting
normal user level privileges to Administrator level privileges on the
Switch.
show authen_enable [default | method_list_name <string 15> | all]
This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges.
default – Entering this parameter will display the default method list for
users attempting to gain access to Administrator level privileges on the
Switch.
method_list_name <string 15> − Enter an alphanumeric string of up to
15 characters to define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login
methods currently configured on the Switch.
The window will display the following parameters:
Method List Name – The name of a previously configured method list
name.
Priority – Defines which order the method list protocols will be queried
for authentication when a user attempts to log on to the Switch. Priority
ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are implemented, per
method list name.
Comment – Defines the type of Method. User-defined Group refers to
server groups defined by the user. Built-in Group refers to the TACACS,
XTACACS, TACACS+ and RADIUS security protocols which are
permanently set in the Switch. Keyword refers to authentication using a
technique INSTEAD of TACACS/XTACACS/TACACS+/RADIUS which
are local (authentication through the local_enable password on the
Switch) and none (no authentication necessary to access any function
on the Switch).
None.
Priority Method Name
-------- -------------
1 tacacs+
2 tacacs
3 ctsnow
4 local_enable
1 tacacs+
2 local_enable
Comment
------------------
Built-in Group
Built-in Group
User-defined Group
Keyword
Built-in Group
Keyword
263