D-Link DES-1228/ME Reference Manual page 31

To restore all of the Switch's parameters to their default values and have the Switch save and reboot:
DES-1228/ME:5#reset system
Command: reset system
Are you sure you want to proceed with system reset, save and reboot?(y/n) y
Load Factory Default Configuration...
Saving all configurations to NV-RAM...
Please wait, the switch is rebooting...
login
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To initiate the login procedure:
DES-1228/ME:5#login
Command: login
UserName:
logout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To terminate the current user's console session:
DES-1228/ME:5#logout
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to log in a user to the Switch's console.
login
This command is used to initiate the login procedure. The user will be
prompted for a Username and Password.
None.
None.
Used to log out a user from the Switch's console.
logout
This command terminates the current user's session on the Switch's
console.
None.
None.
Done.
Done.
27