D-Link DES-1228/ME Reference Manual page 130

Example usage:
To display the multicast MAC address table:
DES-1228/ME:5#show multicast_fdb vlan default
Command: show multicast_fdb vlan default
VLAN Name
MAC Address
Egress Ports
Mode
Total Entries
DES-1228/ME:5#
show fdb
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
: default
: 01-00-5E-00-00-00
: 1-5
: Static
: 1
Used to display the current unicast MAC address forwarding database.
show fdb {port <port> | vlan <vlan_name 32> | vlandid <vidlist> |
mac_address <macaddr> | static | aging_time}
This command is used to display the current contents of the Switch's
forwarding database.
port <port> − The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified device
through this port.
<vlan_name 32> − The name of the VLAN on which the MAC address
resides.
<vidlist> − Displays the entries for the VLANs indicated by VID list.
<macaddr> − The MAC address that is present in the forwarding
database table.
static − Displays the static MAC address entries.
aging_time − Displays the aging time for the MAC address forwarding
database.
None.
126