D-Link DES-1228/ME Reference Manual page 258

Command
enable authen_policy
disable authen_policy
show authen_policy
create authen_login
method_list_name
config authen_login
delete authen_login
method_list_name
show authen_login
create authen_enable
method_list_name
config authen_enable
delete authen_enable
method_list_name
show authen_enable
config authen application
show authen application
create authen
server_group
config authen
server_group
delete authen
server_group
show authen
server_group
create authen
server_host
config authen server_host
delete authen server_host
show authen server_host
config authen parameter
response_timeout
config authen parameter
attempt
show authen parameter
enable admin
config admin local_enable
Each command is listed, in detail, in the following sections.
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
<string 15>
[default | method_list_name <string 15>] method {tacacs | xtacacs | tacacs+ |
radius | server_group <string 15> | local | none} (1)
<string 15>
{default | method_list_name <string 15> | all}
<string 15>
[default | method_list_name <string 15>] method {tacacs | xtacacs | tacacs+ |
radius | server_group <string 15> | local_enable | none} (1)
<string 15>
[default | method_list_name <string 15> | all]
{console | telnet | ssh | http | all] [login | enable] [default | method_list_name <string
15>]
<string 15>
[tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete] server_host
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
<string 15>
<string 15>
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-65535> | key
[<key_string 254> | none] | timeout <int 1-255> | retransmit <int 1-255>}
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-65535> | key
[<key_string 254> | none] | timeout <int 1-255> | retransmit <int 1-255>} (1)
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
<int 0-255>
<int 1-255>
254