D-Link DES-1228/ME Reference Manual page 162

show vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
DES-1228/ME:5#show vlan
Command: show vlan
VID
VLAN Type
Member Ports
Static Ports
Current Tagged Ports
Current Untagged Ports : 1-28
Static Tagged Ports
Static Untagged Ports
Forbidden Ports
Total Entries
DES-1228/ME:5#
To display the Switch's current VLAN settings for a specific port:
DES-1228/ME:5#show vlan port 1
Command: show vlan ports 1
Port 1
VLAN ID
-------
1
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the current VLAN configuration on the Switch
show vlan [<vlan_name 32> | vlanid <vidlist> | ports <portlist> ]
This command is used to display summary information about each
VLAN including the VLAN ID, VLAN name, VLAN Type, the
Tagging/Untagging status, and the Member/Non-
member/Forbidden status of each port that is a member of the
VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which to
display a summary of settings.
vlanid <vidlist> − Specifies a range of multiple VLAN IDs to be
displayed.
ports <portlist> − Specifies a port or range of ports that will be
displayed.
None.
: 1
: Static
: 1-28
: 1-28
:
:
: 1-28
:
: 1
Untagged Tagged Forbidden
-------- ------ ---------
X -
VLAN Name : default
Advertisement : Enabled
Dynamic
-------
- -
158