D-Link DES-1228/ME Reference Manual page 345

create address_binding ip_mac ipaddress
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create address binding on the Switch:
DES-1228/ME:5#create address_binding ip_mac ipaddress 10.1.1.3 mac_address
00-00-00-00-00-04
Command: create address_binding ip_mac ipaddress 10.1.1.3 mac_address 00-
00-00-00-00-04
Success.
DES-1228/ME:5#
config address_binding ip_mac ipaddress
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to create an IP-MAC-port binding entry.
create address_binding ip_mac ipaddress <ipaddr> mac_address
<macaddr> {ports [<portlist> | all]}
This command is used to create an IP-MAC-port binding entry.
<ipaddr> The IP address of the device where the IP-MAC-port binding
is made.
<macaddr> The MAC address of the device where the IP-MAC-port
binding is made.
<portlist> - Specifies a port or range of ports to be configured for
address binding.
all – Specifies that all ports on the Switch will be configured for address
binding.
Only Administrator level, Operator level or Power User level users can
issue this command.
Used to configure an IP-MAC-port binding entry.
config address_binding ip_mac ipaddress <ipaddr> mac_address
<macaddr> {ports [<portlist> | all]}
This command is used to configure an IP-MAC-port binding entry.
<ipaddr> - The IP address of the device where the IP-MAC-port binding is
made.
<macaddr> - The MAC address of the device where the IP-MAC-port
binding is made.
<portlist> - Specifies a port or range of ports to be configured for address
binding.
all – Specifies that all ports on the Switch will be configured for address
binding.
Only Administrator level, Operator level or Power User level users can
issue this command.
341