D-Link DES-1228/ME Reference Manual page 60

Example usage:
To display the currently entered SNMP community strings:
DES-1228/ME:5#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
---------------------
dlinkcomm
private
public
Total Entries: 3
DES-1228/ME:5#
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666":
DES-1228/ME:5#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
View Name
---------------------
dlinkview
CommunityView
CommunityView
Used to configure an identifier for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID 10-64>
This command is used to configure an identifier for the SNMP
engine on the Switch.
<snmp_engineID 10-64> − An alphanumeric string that will be used
to identify the SNMP engine on the Switch.
Only Administrator level, Operator level or Power User level users
can issue this command.
56
Access Right
------------
read_write
read_write
read_only