Flow Meter Commands - D-Link DES-1228/ME Reference Manual

The Flow Meter commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command
config flow_meter
profile_id
show flow_meter
Each command is listed, in detail, in the following sections.
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
<value 1-256> access_id < access_id >[[ rate <value 64-
1024000> burst_size <value 0-1016> rate_exceed
[drop_packet|remark_dscp <value 0-63>]] |delete]
{profile_id <value 1-256> {access_id <access_id>}}
F
LOW
354
M C
ETER OMMANDS
43