D-Link DES-1228/ME Reference Manual page 182

Example usage:
To show IGMP snooping:
DES-1228/ME:5#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State
Multicast Router Only
Data Driven Learning Max Entries
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Querier State
Querier Role
Querier IP
Querier Expiry Time
State
Fast Leave
Version
Data Driven Learning Aged Out : Disabled
Total Entries : 1
DES-1228/ME:5#
show router_ports
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
: default
: 125
: 10
: 2
: 1
: Disabled
: Non-Querier
: 0.0.0.0
: 0 secs
: Disabled
: Disabled
: 3
Used to display the currently configured router ports on the Switch.
show router_ports {[vlan <vlan_name 32> | vlanid <vidlist>] } {[static |
dynamic | forbidden]}
This command is used to display the router ports currently configured
on the Switch.
<vlan_name 32> − The name of the VLAN on which the router port
resides.
<vidlist> − The VID range of the router ports to be displayed.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically
configured.
forbidden − Displays forbidden router ports that have been statically
configured.
None.
: Disabled
: Disabled
: 56
178