D-Link DES-1228/ME Reference Manual page 376

disable bpdu_protection
Purpose Used to disable BPDU attack protection on the Switch.
Syntax disable bpdu_protection
Description Use this to disable BPDU attack protection on the entire Switch. Note that if BPDU attack
protection is disabled globally, it will also be disabled for ports regardless of the config
bpdu_protection ports settings.
Parameters None.
Restrictions Only Administrator level, Operator level or Power User level users can issue this
command.
Example usage:
To disable BPDU attack protection on the entire Switch:
DES-1228/ME:5# disable bpdu_protection
Commands: disable bpdu_protection
Success.
DES-1228/ME:5#
show bpdu_protection
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display global settings for BPDU protection:
DES-1228/ME:5# show bpdu_protection
Commands: show bpdu_protection
BPDU Protection Global Settings
---------------------------------------
BPDU Protection Status
BPDU Protection Recovery Time
BPDU Protection Trap State
BPDU Protection Log State
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display BPDU attack protection settings on the Switch.
show bpdu_protection {ports {<portlist> }}
Use this to view the global or per port BPDU attack protection configuration.
ports – Specify to view the BPDU attack protection port configuration.
<portlist>- Specify the ports to display. If none is specified, all ports BPDU attack
protection configuration will be listed.
None.
: Enabled
: 60 seconds
: None
: None
372