D-Link DES-1228/ME Reference Manual page 66

delete snmp host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an SNMP host entry:
DES-1228/ME:5#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DES-1228/ME:5#
show snmp host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP hosts on the Switch:
DES-1228/ME:5#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address
---------------
10.48.76.23
10.48.74.100
Total Entries
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to remove a recipient of SNMP traps generated by the Switch's
SNMP agent.
delete snmp [host <ipaddr>]
This command is used to delete a recipient of SNMP traps generated
by the Switch's SNMP agent.
<ipaddr> – The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
Only Administrator level, Operator level or Power User level users
can issue this command.
Used to display the recipient of SNMP traps generated by the
Switch's SNMP agent.
show snmp host {<ipaddr>}
This command is used to display the IP addresses and configuration
information of remote SNMP managers that are designated as
recipients of SNMP traps that are generated by the Switch's SNMP
agent.
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
None.
SNMP Version
---------------
V3 noauthnopriv
V2c
: 2
Community Name / SNMPv3 User Name
---------------------------------
initial
public
62