D-Link DES-1228/ME Reference Manual page 197

Each command is listed, in detail, in the following sections:
enable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable 802.1X switch wide:
DES-1228/ME:5#enable 802.1x
Command: enable 802.1x
Success.
DES-1228/ME:5#
disable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1x on the Switch:
DES-1228/ME:5#disable 802.1x
Command: disable 802.1x
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to enable the 802.1X server on the Switch.
enable 802.1x
This command is used to enable the 802.1X Network Access control
application on the Switch. To select between port-based or Host-based,
use the config 802.1x auth_mode command.
None.
Only Administrator level, Operator level or Power User level users can
issue this command.
Used to disable the 802.1X server on the Switch.
disable 802.1x
This command is used to disable the 802.1X Network Access control
application on the Switch.
None.
Only Administrator level, Operator level or Power User level users can
issue this command.
193