D-Link DES-1228/ME Reference Manual page 105

show syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show syslog host information:
DES-1228/ME:5#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address
------- ---------------
1 10.1.1.2
2 10.40.2.3
3 10.21.13.1
Total Entries : 3
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the syslog hosts currently configured on the Switch.
show syslog host {<index 1-4>}
This command is used to display the syslog hosts that are currently
configured on the Switch.
<index 1-4> − Specifies that the command will be applied to an
index of hosts. There are four available indexes, numbered 1
through 4.
None.
Severity
--------------
All
All
All
Facility UDP port
-------- --------
Local0 514
Local0 514
Local0 514
101
Status
--------
Disabled
Disabled
Disabled