D-Link DES-1228/ME Reference Manual page 208

Example usage:
To display RADIUS settings on the Switch:
DES-1228/ME:5#show radius
Command: show radius
Timeout : 5 seconds
Retransmit : 2
Index IP Address
----- ------------------
1 10.1.1.1
2 20.1.1.1
3 30.1.1.1
Total Entries : 3
DES-1228/ME:5#
create 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a previously created VLAN as an 802.1X Guest VLAN for the Switch:
DES-1228/ME:5#create 802.1x guest_vlan Tiberius
Command: create 802.1x guest_vlan Tiberius
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Auth-Port Acct-Port
Number Number
--------- ---------
1812
1800
1812
Used to configure a pre-existing VLAN as a 802.1X Guest VLAN.
create 802.1x guest_vlan {<vlan_name 32>}
This command is used to configure a pre-defined VLAN as a 802.1X
Guest VLAN. Guest 802.1X VLAN clients are those who have not
been authorized for 802.1X or they haven't yet installed the
necessary 802.1X software, yet would still like to have limited access
rights on the Switch.
<vlan_name 32> − Enter an alphanumeric string of no more than 32
characters to define a pre-existing VLAN as a 802.1X Guest VLAN.
This VLAN must have first been created with the create vlan
command mentioned earlier in this manual.
Only Administrator level, Operator level or Power User level users
can issue this command.
Users must have already previously created a VLAN using the
create vlan command. Only one VLAN can be set as the 802.1X
Guest VLAN.
Status
--------------
1813 Active
1813 Active
1813 Active
204
Key
---------------
switch
switch2
switch3