show greeting_message
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the currently configured greeting message:
DES-1228/ME:5#show greeting_message
Command: show greeting_message
================================================================================
Copyright(C) 2012 D-Link Corporation. All rights reserved.
================================================================================
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to view the currently configured greeting message
configured on the Switch.
show greeting_message
This command is used to view the currently configured greeting
message on the Switch.
None.
None.
DES-1228/ME Metro Ethernet Switch
Command Line Interface
Firmware: Build 2.01.001
36