D-Link DES-1228/ME Reference Manual page 123

show stp instance
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DES-1228/ME:5#show stp instance 0
Command: show stp instance 0
STP Instance Settings
---------------------------
Instance Type
Instance Status
Instance Priority
STP Instance Operational Status
--------------------------------
Designated Root Bridge
External Root Cost
Regional Root Bridge
Internal Root Cost
Designated Bridge
Root Port
Max Age
Forward Delay
Last Topology Change
Topology Changes Count
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the Switch's STP instance configuration
show stp instance {<value 0-8>}
This command is used to display the Switch's current STP Instance Settings and the STP
Instance Operational Status.
<value 0-8> − Enter a value defining the previously configured instance_id on the Switch.
An entry of 0 will display the STP configuration for the CIST internally set on the Switch.
None
: CIST
: Enabled
: 32768(Bridge Priority : 32768, sys ID ext : 0 )
: 32766/00-90-27-39-78-E2
: 200012
: 32768/00-53-13-1A-33-24
: 0
: 32768/00-50-BA-71-20-D6
: 1
: 20
: 15
: 856
: 2987
119