D-Link DES-1228/ME Reference Manual page 200

Example usage:
To display the 802.1X authentication state for host-based 802.1X:
DES-1228/ME:5#show 802.1x auth_state
Command: show 802.1x auth_state
Port Number : 1
Index MAC Address
------ -----------------
1 00-80-C8-4D-4E-0A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
config 802.1x auth_mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1X authentication by MAC address:
DES-1228/ME:5#config 802.1x auth_mode mac_based
Command: config 802.1x auth_mode mac_based
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Auth PAE State
--------------
Connecting
Used to configure the 802.1X authentication mode on the Switch.
config 802.1x auth_mode [port_based | mac_based]
This command is used to enable either the port-based or Host-based
802.1X authentication feature on the Switch.
[port_based | mac_based] − The Switch allows users to authenticate
802.1X by either port or MAC address.
Only Administrator level, Operator level or Power User level users
can issue this command.
Backend State
-------------
Idle
196
Port Status
------------
Unauthorized