D-Link DES-1228/ME Reference Manual page 55

show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DES-1228/ME:5#show snmp user
Command: show snmp user
Username
---------------
initial
dlinkuser
Total Entries
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
This command is used to display information about each SNMP
username in the SNMP group username table.
None.
None.
Group Name SNMP Version Auth-Protocol PrivProtocol
--------------- ------------ ------------- ------------
initial V3
dlink V3
: 2
None
MD5
51
None
None