Command History Commands - D-Link DES-1228/ME Reference Manual

The Command History commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command
?
dir
config command_history
show command_history
Each command is listed, in detail, in the following sections:
?
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
<value 1-40>
Used to display all commands in the Command Line Interface (CLI).
? {<command>}
This command is used to display all of the commands available through
the Command Line Interface (CLI).
{<command>} – Entering the question mark with an appropriate
command will list all the corresponding parameters for the specified
command, along with a brief description of the commands function and
similar commands having the same words in the command.
None.
C H
OMMAND
363
C
ISTORY OMMANDS
46