Asymmetric Vlan Commands - D-Link DES-1228/ME Reference Manual

The Asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections:
enable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable asymmetric VLANs:
DES-1228/ME:5#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-1228/ME:5#
disable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
Used to enable asymmetric VLANs on the Switch.
enable asymmetric_vlan
This command is used to enable the asymmetric VLAN function on
the Switch
None.
Only Administrator level, Operator level or Power User level users
can issue this command
Used to disable asymmetric VLANs on the Switch.
disable asymmetric_vlan
This command is used to disable the asymmetric VLAN function on
the Switch
None.
Only Administrator level, Operator level or Power User level users
can issue this command.
A
SYMMETRIC
305
37
VLAN C
OMMANDS