Port Security Commands - D-Link DES-1228/ME Reference Manual

The Port Security commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command
config port_security ports
delete port_security_entry
clear port_security_entry
show port_security
enable port_security trap_log
disable port_security trap_log
Each command is listed, in detail, in the following sections:
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
[<auth_portlist> | all] {admin_state [enable | disable] |
max_learning_addr <max_lock_no 0-64> | lock_address_mode
[DeleteOnTimeout | DeleteOnReset | Permanent]} (1)
vlan_name <vlan_name 32> mac_address <macaddr> port
<auth_port>
port <auth_portlist>
{ports <auth_portlist>}
P S
ORT ECURITY
41
7
C
OMMANDS