Diffserv Policy Commands; Assign-Queue; Drop; Mirror - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

DiffServ Policy Commands

Use the DiffServ policy commands to specify traffic conditioning actions, such as policing and marking, to apply
to traffic classes .
Use the policy commands to associate a traffic class that you define by using the class command set with one
or more QoS policy attributes . Assign the class/policy association to an interface to form a service . Specify the
policy name when you create the policy .
Each traffic class defines a particular treatment for packets that match the class definition . You can associate
multiple traffic classes with a single policy . When a packet satisfies the conditions of more than one class,
preference is based on the order in which you add the classes to the policy . The first class you add has the
highest precedence .
This set of commands consists of policy creation/deletion, class addition/removal, and individual policy
attributes .
Note: The only way to remove an individual policy attribute from a class instance within a policy is
to remove the class instance and re-add it to the policy . The values associated with an existing policy
attribute can be changed without removing the class instance .
The CLI command root is policy-map .

assign-queue

This command modifies the queue id to which the associated traffic stream is assigned . The
integer from 0 to n-1, where n is the number of egress queues supported by the device .
assign-queue queueid
Format
Mode Policy-Class-Map Config
Incompatibilities

Drop

drop
This command specifies that all packets for the associated traffic stream are to be dropped at ingress .
drop
Format
Mode Policy-Class-Map Config
Incompatibilities Assign Queue, Mark (all forms), Mirror, Police, Redirect

mirror

This command specifies that all incoming packets for the associated traffic stream are copied to a specific egress
interface (physical port or LAG) .
mirror slot/port
Format
Mode Policy-Class-Map Config
Incompatibilities Drop, Redirect

redirect

This command specifies that all incoming packets for the associated traffic stream are redirected to a specific
egress interface (physical port or port-channel) .
redirect slot/port
Format
Mode
Policy-Class-Map Config
Incompatibilities Drop, Mirror
Ubiquiti Networks, Inc.
Quality of Service Commands
queueid
is an
379