Diffserv Class Commands; Class-Map; Class-Map Rename - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

DiffServ Class Commands

Use the DiffServ class commands to define traffic classification . To classify traffic, you specify Behavior Aggregate
(BA), based on DSCP and Multi-Field (MF) classes of traffic (name, match criteria) .
This set of commands consists of class creation/deletion and matching, with the class match commands
specifying Layer 3, Layer 2, and general match criteria . The class match criteria are also known as class rules, with
a class definition consisting of one or more rules to identify the traffic that belongs to the class .
Note: Once you create a class match criterion for a class, you cannot change or delete the criterion . To
change or delete a class match criterion, you must delete and re-create the entire class .
The CLI command root is class-map .

class-map

This command defines a DiffServ class of type match-all . When used without any match condition, this
command enters the class-map mode . The
to 31 characters uniquely identifying an existing DiffServ class .
Note: The class-map-name 'default' is reserved and must not be used .
match-all
The class type of
considered a member of the class .This command may be used without specifying a class type to enter the Class-
Map Config mode for an existing DiffServ class .
Note: The CLI mode is changed to Class-Map Config when this command is successfully executed
depending on the keyword specified .
class-map match-all class-map-name [ipv4 | ipv6]
Format
Mode Global Config
no class-map
This command eliminates an existing DiffServ class . The
default
class . (The class name
if the class is currently referenced by one or more policies or by any other class, the delete action fails .
no class-map class-map-name
Format
Mode Global Config

class-map rename

This command changes the name of a DiffServ class . The
new-class-map-name
DiffServ class . The
characters uniquely identifying the class .
Default none
class-map rename class-map-name new-class-map-name
Format
Mode Global Config
Ubiquiti Networks, Inc.
class-map-name
indicates all of the individual match conditions must be true for a packet to be
class-map-name
is reserved and is not allowed here .) This command may be issued at any time;
class-map-name
parameter is a case-sensitive alphanumeric string from 1 to 31
Quality of Service Commands
is a case-sensitive alphanumeric string from 1
is the name of an existing DiffServ
is the name of an existing
373