Configuring Poe Settings - Ubiquiti TS-16-CARRIER Quick Start Manual

Configuring PoE Settings

WARNING:
connected device supports passive PoE and the
supplied voltage. By default, PoE is off on each port.
1. Click the Ports tab.
2. On the Ports tab, select the Ethernet port you want to
configure. Select the appropriate PoE Status setting, and
then click Save Changes.
The PoE LED on the Ethernet port will confirm the PoE setting.
For detailed instructions on configuring other features,
please refer to the TOUGHSwitch PoE User Guide available at
documentation.ubnt.com/toughswitch
Before activating PoE, ensure that the
*640-00056-03*
640-00056-03