Safety Instructions; Electrical Safety Information - Ubiquiti USW-Pro-48-POE Quick Start Manual

Wattage per Port per PSE 802.3at
802.3bt
802.3af voltage range mode
802.3at/bt voltage range mode

safety instructions

1. Read, follow and save these instructions.
2. Pay attention to all warnings.
3. Only use the devices or accessories indicated by the manufacturer.
WARNING: Lack of adequate ventilation may result in a fire hazard.
Keep at least 20mm clearance next to the ventilation holes for proper ventilation.
WARNING: To reduce the risk of fire or electric shock, do not expose the product to rain
or moisture.
WARNING: Do not use this product in a place where it can be submerged in water.
WARNING: Avoid using this product during a lightning storm. There is a remote
possibility of an electrical discharge caused by lightning.

electrical safety information

1. It is mandatory to comply with the current, frequency and voltage requirements indicated on
the manufacturer's label. Connection to a power source other than those specified may result
in malfunction, equipment damage, or fire hazard if limitations are not followed.
2. This equipment contains no operator-serviceable parts. Only a qualified service technician
should provide services.
3. This equipment is supplied with a detachable power cord that has an integral safety ground
wire designed to be connected to a safety ground. a. Do not substitute the power cord with one
other than the approved type provided. Never use an adapter plug to connect to a two-wire
outlet, as it will break the continuity of the ground wire.
b. The equipment requires the use of the ground wire as part of the safety certification.
Modification or misuse can create a shock hazard, which could cause serious injury or
death. c. If you have any questions about the installation, contact an electrician
qualified person or the manufacturer before connecting the equipment.
USW-Pro-48-POE Quick Start Guide
PoE
Maximum PoE
32W
64W
44-57V
50-57v