Snmp-Server Location; Show Snmp - Edge-Core ECS4810-12M Layer 2 Management Manual

| SNMP Commands
C 22
HAPTER
snmp-server
location

show snmp

C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#snmp-server contact Paul
Console(config)#
R C
ELATED OMMANDS

snmp-server location (660)

This command sets the system location string. Use the no form to remove
the location string.
S
YNTAX
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#snmp-server location WC-19
Console(config)#
R C
ELATED OMMANDS
snmp-server contact (659)
This command can be used to check the status of SNMP communications.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Normal Exec, Privileged Exec
C U
OMMAND SAGE
This command provides information on the community access strings,
counter information for SNMP input and output protocol data units, and
whether or not SNMP logging has been enabled with the snmp-server
enable traps command.
– 660 –