Figure 117: Setting The Queue Mode (Strict) - Edge-Core ECS4810-12M Layer 2 Management Manual

| Class of Service
C 11
HAPTER
Layer 2 Queue Settings
Weight – Sets a weight for each queue which is used by the WRR
◆
scheduler. (Range: 1-255; Default: Weights 1, 2, 4, 6, 8, 10, 12 and 14
are assigned to queues 0 - 7 respectively)
W I
EB NTERFACE
To configure the queue mode:
Click Traffic, Priority, Queue.
1.
Set the queue mode.
2.
If the weighted queue mode is selected, the queue weight can be
3.
modified if required.
If the queue mode that uses a combination of strict and weighted
4.
queueing is selected, the queues which are serviced first must be
specified by enabling strict mode parameter in the table.
Click Apply.
5.

Figure 117: Setting the Queue Mode (Strict)

Figure 118: Setting the Queue Mode (WRR)
– 246 –