Figure 127: Configuring A Class Map - Edge-Core ECS4810-12M Layer 2 Management Manual

Description – A brief description of a class map. (Range: 1-64
◆
characters)
Add Rule
Class Name – Name of the class map.
◆
Type – The criteria specified by the match command. (This field is set
◆
on the Add page.)
ACL – Name of an access control list. Any type of ACL can be specified,
◆
including standard or extended IP ACLs and MAC ACLs.
IP DSCP – A DSCP value. (Range: 0-63)
◆
◆ IP Precedence – An IP Precedence value. (Range: 0-7)
IPv6 DSCP – A DSCP value contained in an IPv6 packet. (Range: 0-63)
◆
VLAN ID – A VLAN. (Range:1-4093)
◆
CoS – A CoS value. (Range: 0-7)
◆
◆ Source Port – A source port. (Range: 1-12)
W I
EB NTERFACE
To configure a class map:
Click Traffic, DiffServ.
1.
Select Configure Class from the Step list.
2.
Select Add from the Action list.
3.
Enter a class name.
4.
Enter a description.
5.
Click Add.
6.

Figure 127: Configuring a Class Map

– 259 –
| Quality of Service
C 12
HAPTER
Configuring a Class Map