Lldp Basic-Tlv Port-Description - Edge-Core ECS4810-12M Layer 2 Management Manual

| LLDP Commands
C 40
HAPTER
lldp basic-tlv port-
description
enterprise specific or other starting points for the search, such as the
Interface or Entity MIB.
Since there are typically a number of different addresses associated
◆
with a Layer 3 device, an individual LLDP PDU may contain more than
one management address TLV.
Every management address TLV that reports an address that is
◆
accessible on a port and protocol VLAN through the particular port
should be accompanied by a port and protocol VLAN TLV that indicates
the VLAN identifier (VID) associated with the management address
reported by this TLV.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv management-ip-address
Console(config-if)#
This command configures an LLDP-enabled port to advertise its port
description. Use the no form to disable this feature.
S
YNTAX
[no] lldp basic-tlv port-description
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
The port description is taken from the ifDescr object in RFC 2863, which
includes information about the manufacturer, the product name, and the
version of the interface hardware/software.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv port-description
Console(config-if)#
– 1076 –